F220 Photoelectric Smoke Detectors

F220 Photoelectric Smoke Detectors
  • Two-wire or four-wire bases
  • 30 ft (9 m) maximum spacing between detectors
  • Optional CO-sensor, heat-sensor enhanced detection chamber
  • Clean chamber without removal or disassembly
  • CleanMe signaling capability
  • Sensitivity readout on detector
  • Detector chamber compensates for dust build-up
  • Tamper protection
  • Dual-color LED
 

Variantes de Producto

F220-PTHC Cabezal detector humo, fijo 135°F CO

Photoelectric detector head with heat and CO sensor augmentation only; requires base.

Referencia comercial No. F220-PTHC
Producto No. 4.998.112.251

 
F220-PTH Cabezal detector humo, fijo 135°F

Photoelectric detector head with heat sensor only; requires base.

Referencia comercial No. F220-PTH
Producto No. 4.998.112.249

 
 
F220-P Cabezal detector de humo, fotoeléctrico

Photoelectric detector head only; requires base.

Referencia comercial No. F220-P
Producto No. 4.998.112.248

 

Accesorios

D275 POWER SUPERVISION MODULE

D275 POWER SUPERVISION MODULE

Line supervision device for four-wire fire detection circuits

Referencia comercial No. D275
Producto No. 4.998.140.339

 
DRA-5 Placa indicador remoto, 5V

DRA-5 Placa indicador remoto, 5V

Provides remote annunciation of alarms for a number of Bosch smoke and heat detectors

Referencia comercial No. DRA-5
Producto No. 4.998.132.729

 
 
DT-2 Herramienta extracción/prueba detector

DT-2 Herramienta extracción/prueba detector

Use the DT‑2 to remove, replace, or test the detector head

Referencia comercial No. DT-2
Producto No. 4.998.151.481

 
F220-B6 Base, 2 cables, 12/24V

F220-B6 Base, 2 cables, 12/24V

Standard base for two‑wire (12 VDC or 24 VDC system) applications. The base works with the F220 smoke detectors and heat detectors.

Referencia comercial No. F220-B6
Producto No. 4.998.112.240

 
 
F220-B6R Base con relé tipo A, 4 cables, 12/24V

F220-B6R Base con relé tipo A, 4 cables, 12/24V

Standard base for four‑wire (12 VDC or 24 VDC) detector systems. The base works with the F220 smoke detectors and heat detectors.

Referencia comercial No. F220-B6R
Producto No. 4.998.112.242

 
F220‑B6RS 24 VDC Four‑wire Detector Base with Sounder

F220-B6RS Base con sirena y relé tipo A, 4 cables

Four-wire detector base with sounder for use with the F220 Photoelectric Smoke and Heat Detectors.

Referencia comercial No. F220-B6RS
Producto No. 4.998.112.230

 
 
F220-B6C Base, 4 cables, relés tipo A y C, 12/24V

F220-B6C Base, 4 cables, relés tipo A y C, 12/24V

Four‑wire base with a normally‑open (NO) alarm loop relay and a set of auxiliary contacts (Form C). The base works with the F220 smoke detectors and heat detectors.

Referencia comercial No. F220-B6C
Producto No. 4.998.113.024

 
F220-B6E Base, relé final línea, 4 cables, 12/24V

F220-B6E Base, relé final línea, 4 cables, 12/24V

Four‑wire base with a normally‑open (NO) alarm relay and an EOL power supervision relay. The base works with the F220 smoke detectors and heat detectors.

Referencia comercial No. F220-B6E
Producto No. 4.998.114.525

 
 

F220-B6PM Base, múltiple, 4 cables 12/24V

The multiple detector base provides an address on the FACP data expansion circuit for its detector and up to an additional 19 detectors. It accepts the F220 Photoelectric Smoke Detector Heads and Heat Detector Heads.

Referencia comercial No. F220-B6PM
Producto No. 4.998.125.341

 
F220-B6PS Base, única, 4 cables 12/24V

F220-B6PS Base, única, 4 cables 12/24V

The single detector base provides an address on the FACP data expansion circuit for its detector. It accepts the F220 Photoelectric Smoke Detector Heads and Heat Detector Heads.

Referencia comercial No. F220-B6PS
Producto No. 4.998.151.484