Accesorios direccionables


 
Anunciador LCD y teclado control
  • Compatible with the FPD‑7024 FACP
  • Two‑line, 32‑character, alphanumeric LCD display
  • Status LEDs identify alarm, trouble, supervisory, and silenced conditions
  • Address setting by jumper
  • Remotely control system commands and programming
  • Passcode protection controls system access
  • Low profile design
 
 
D7030X Anunciadores LED
  • Para su uso con la Central de Incendios Compacta FPA‑1000‑UL o la Central de Incendios FPD‑7024
  • LED que indica las condiciones de alimentación y problemas
  • LED que indica ocho zonas individuales ampliables a 64 zonas
  • Funciones remotas de restablecimiento del panel de control y silenciamiento de los dispositivos de notificación
  • Perfil bajo y diseño elegante
  • Forma parte del listado UL
 
 
D7032 Expansor de Anunciador LED de Ocho Zonas
  • Cuenta con ocho LED remotos
  • Sencilla conexión mediante cable con el Anunciador LED de la Serie D7030X
  • Sencilla conexión con el bus de opciones
 
 
Módulo iniciación, clase dual B, 12/24V
  • Two separate powered detector loops
  • Suitable for 12 VDC or 24 VDC, two‑wire or four‑wire detectors
  • Up to 50 two‑wire 12 VDC glass break detectors
  • Reports individual loop alarm, individual loop trouble, and ground fault
  • Manually resets latching devices from control panel or remote central station
 
 
REVERSING RELAY MODULE
 
 
Módulo circuito iniciación, clase dual A
  • Adjustable alarm and reset delays
  • Provides two supervised Class A (Style D) loops
  • Reliable terminal connections
  • Suitable for waterflow switches
  • Compensates for sprinkler alarm valve fanning
  • Suitable for mechanical initiating devices
 
 
REV POLARITY INTRFC MOD
  • UL Listed for NFPA 72 remote station applications
  • Adjustable alarm and supervisory output current
  • Alarm activation delay
  • System test mode with LED indicator
  • Easy installation
 
 
Módulo dispositivos de notificación
  • Supervises 12 VDC or 24 VDC notification appliance circuits (NACs)
  • Supervised signal silencing switch
  • Notification appliance circuit rated at 3.0 A
  • Multiple module configurations
  • Mounts in panel enclosure
 
 
D7035 Módulos de 8 Relés
  • Ocho salidas de relé con Forma C programables
  • El módulo D7035 se monta fácilmente en el interior de la carcasa de la Central de Incendios sin necesidad de utilizar una carcasa independiente
  • El módulo D7035B incluye una placa de montaje y una carcasa para un montaje en el exterior de la carcasa de la Central de Incendio
  • La Central de Incendio es compatible con un máximo de dos módulos
 
 
Placa indicador remoto
  • Green pilot LED, red alarm LED
  • Use single‑gang back box
 
 
Módulo extensión multiplex
  • Has two Class B (Style 4) multiplex buses (supports addresses 9 to 255)
  • Provides one Class A (Style 6) multiplex bus (supports addresses 9 to 128)
  • Expands number of user codes to 100 PINs
  • Increases event history buffer to 499 events
  • Compatible with RPS
  • Easy to install
 
 
D7042/D7042B Remote modules, 8‑input
  • Provides eight Class B initiating circuits
  • Includes eight UL Listed EOL resistors
  • Convenient plastic case (D7042) or red metal fire enclosure (D7042B) for remote mounting
  • Easy to install
  • Connects to panel’s multiplex bus through a MUX expansion module
 
 
Módulo una entrada multiplex, 12V
  • Use with FPD‑7024, D7024, or DS9400 Addressable FACPs
  • Fits into a standard double‑gang or four‑inch square back box
  • Easy addressing using rotary switches
  • Low current draw
  • UL Listed
 
 
Módulo una entrada multiplex mini, 12V
  • Use with FPD‑7024, D7024, or DS9400 addressable FACPs
  • Fits into a standard single‑gang back box
  • Easy addressing using rotary switches
  • Low current draw
  • UL Listed
 
 
D7048/D7048B Módulos Driver Octal
  • Compatible con la Central de Incendios D7024, FPD-7024 o FPA‑1000‑UL
  • El módulo D7048 se monta en el interior de la Central de Incendios (no se requiere una carcasa adicional)
  • El módulo D7048B incluye una placa de montaje y una carcasa metálica roja para un montaje en el exterior de la carcasa de la Central de Incendios
  • Cada salida de driver es totalmente programable
  • La Central de Incendios es compatible con un máximo de dos módulos
 
 
D7052 MUX dual-input module, 12V
  • Use with FPD‑7024, D7024, or DS9400 addressable FACPs
  • Fits into a standard double‑gang or four‑inch square back box
  • Easy addressing using rotary switches
  • Low current draw
  • UL Listed
 
 
Módulo entrada/salida multiplex, 12V
  • Use with FPD-7024, D7024, or DS9400 addressable FACPs
  • Fits into a standard double-gang or four-inch square back box
  • Easy addressing using rotary switches
  • Low current draw
  • UL Listed
 
 
Placa indicador remoto, 12/24V
  • Easy wiring to D7050‑B6
  • Attractive faceplate with highly‑visible alarm LED
 
 
FMM-100DBB-R Surface-mount Deep Back Box
  • Sturdy metal construction
  • Aesthetic look with rounded corners and edges and glossy red finish
  • Surface mounting
  • Knockouts for ¾-inch conduit
 
 
Extensión IDC, 4 puntos
  • Adds four Class B (Style B) or Class A (Style D) initiating circuits to the FPD‑7024 FACP
  • For use with normally‑open (NO) or normally‑closed (NC) alarm contacts
  • Compatible with two‑wire or four‑wire smoke detectors
  • Up to 20 two‑wire smoke detectors per circuit
  • Easy installation due to plug‑in design and screw terminal circuit connections
  • No programming necessary
 
 
Placa prueba/indicador remoto, 24V
  • Keyed Test/Reset switch
  • Green pilot LED, red alarm LED
  • Uses single‑gang back box
 
 
Soporte escritorio teclado
  • Supports standing a keypad on a desk or tabletop
  • Compatible with multiple keypad models
 
 
MUX BUS ISOLATOR MODULE
  • Easily installs in standard 4 in. square electrical box
  • Steadily-lit yellow LED indicates activated isolator
  • Can be wired Class X, Class A, or Class B
 
 
Módulo extensión multiplex para FPD-7024
  • Provides two Class B multiplex buses (supports addresses 9 to 128, 129 to 255)
  • Provides one Class A multiplex bus (supports addresses 9 to 128)
  • Allows system to support conventional and addressable devices at the same time
  • Scales from a conventional to an addressable system without changing the control panel
  • Increases event history buffer to 499 events
  • Compatible with RPS